6770 Oak Hall Lane, Suite 108
Columbia, MD 21045
Tel: (410) 290-FROTH Fax: (410) 290-6795
2 (3.3 lb) Light plain malt extract
1 lb. light dried malt extract
.5 lb. Crystal 20 malt
.5 lb Caravienne malt
.5 lb Caramunich malt
2 oz. Hallertauer hop pellets
1 oz. Saaz hop pellets
2 tsp. Gypsum
White Labs German Lager yeast (if lagering) or White Labs German Ale yeast or 1 pkg. Nottingham dry ale yeast 3/4c corn sugar for priming
1.Steep grains in hop bag in 1.5 gallons of water at 155° for 30 minutes. Remove grains.
2.Add liquid and dry malt extract and bring to a boil.
3.Add 2 ozs Hallertauer hop pellets and gypsum. Boil for 60 minutes.
4.Add 1 oz Saaz during the last minute of the boil.
5.Combine wort with water to make five gallons. There is no need to strain.
6.Pitch yeast when wort temperature is between approximately 78°.
7.Store at room temperature 2-3 days. If lagering, store in primary fermenter at
40-50° for 4-6 days, then rack into a secondary fermenter and store at below 40° for at least three weeks. If you are not lagering, allow to sit in primary fermenter at 70-75° for 4-5 days, then rack to secondary fermenter for 10-14 days.
8. Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two
pints of boiling water for 15 minutes. Pour this mixture into the empty bottling bucket and syphon the beer from the fermenter over it. This method ensures that the priming sugar will disperse evenly through your beer.
9. For proper carbonation, store your beer at 75° for at least the first week after
bottling. This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation. It=s ready to drink, but it will improve if you age your beer another two to three weeks.